| product name |
Lithium battery brushless lawn mower |
| no-load speed |
18000/min |
| dead time |
About 2-3 hours |
| Length |
105cm-140cm |
| product material |
Steel/Aluminum Tube/Plastic |
| Box gauge |
99*25*11 |
| weight |
4KG |
| scope of application |
Mowing/Shrubs/Gardens, etc |
| Fuel type |
Charging model |
| operating mode |
hand-held |
Track type remote-controlled lawn mower is a modern garden and agricultural machinery equipment. The following is a detailed introduction:
1, Basic structure and appearance
Track section
It adopts a tracked chassis design, and the tracks are generally made of high-strength rubber or metal materials. Rubber tracks have a relatively soft texture and evenly distribute pressure on the ground, reducing compaction damage to lawns and soil, and producing less noise during operation. Metal tracks are more sturdy and durable, suitable for complex and harsh terrain such as rocky mountains or muddy wetlands.
The design of the tracks enables the lawn mower to have good off-road performance, easily crossing obstacles such as ditches and ridges, and maintaining a stable walking posture on uneven ground to avoid the machine tipping over.
Main body of the aircraft
The body is usually composed of a metal frame covered with a protective shell, which can protect the internal mechanical and electronic components while also having a certain degree of aesthetics. The shell material is mostly engineering plastic or steel plate, which has good impact resistance and corrosion resistance.
At the front or side of the fuselage, there is a lawn mowing device, which generally includes high-speed rotating blades or nylon ropes. Blades are usually made of high-quality alloy steel, sharp and wear-resistant, and can effectively cut various weeds and grass. The nylon rope mowing device is relatively safer and suitable for situations where it is necessary to avoid blade injuries, such as parks and other areas with high traffic flow.
Remote control device
Equipped with specialized remote control equipment, the transmission methods of remote control signals mainly include radio waves or infrared radiation. Radio remote control has a relatively long control distance, generally up to tens or even hundreds of meters, and has strong signal penetration ability, making it less susceptible to interference from obstacles. Infrared remote control requires operation within a visible range, with a relatively short distance but a stable signal.
There are various operation buttons or joysticks on the remote control device, which are used to control the forward, backward, steering, start and stop functions of the lawn mower. The operation is simple and convenient, and users can accurately control the lawn mower from a safe distance.
2, Working principle
dynamic system
The main sources of power for tracked remote-controlled lawn mowers are gasoline engines, diesel engines, and electric motors. Gasoline engines have high power and are suitable for large-scale, long-term mowing operations, providing sufficient power to drive the tracks and mowing devices. Diesel engines have high torque and perform well in some heavy-duty conditions, such as mowing in high grass and dense grass areas or on slopes. Electric motors have the characteristics of environmental protection and low noise. Their power output is relatively stable and powered by a battery pack. Although their endurance is limited, they are very suitable for small gardens or places with strict noise requirements.
Mowing process
After activating the mowing device, the blade or nylon rope rotates at high speed. The blade cuts through weeds and grass through shear force, and the cutting height can be achieved by adjusting the chassis height of the lawn mower or the position of the mowing device. During the rotation process, the nylon rope breaks the grass plants it comes into contact with with with its high-speed circular motion, and its mowing effect is similar to a swinging blade mowing. The grass clippings after mowing can be discharged through the grass outlet at the bottom of the machine. Some lawnmowers are also equipped with grass shredding devices, which can evenly scatter the grass clippings on the lawn and have a certain fertilizing effect.
Travel control
The operator sends instructions through the remote control device, and the signal is received by the receiving device on the lawn mower and processed by the control system. The control system will adjust the direction and speed of the track movement according to the instructions. For example, when steering is required, the control system will slow down or stop one track while keeping the other track in motion, thus achieving the steering operation. Adjust the travel speed by controlling the speed of the tracks when moving forward or backward.
3, Applicable scenarios and advantages
Applicable scenarios
This type of lawn mower is widely used in large farms, golf courses, parks, hillside grasslands, and other places. In large farms, it can quickly clear weeds in the fields and improve agricultural production efficiency; On a golf course, it is possible to accurately trim the lawn, maintain the beauty of the course, and ensure the smoothness of the golf course; In the park, mowing operations can be safely carried out in crowded areas to avoid interference and harm to tourists; On hillside grasslands, with its excellent off-road performance, it effectively deals with weeds on sloping terrain.
advantage
High safety: Operators can remotely operate from a certain distance, avoiding direct contact with rotating blades and complex mechanical components, reducing the risk of injury.
Efficient and convenient: Compared to traditional manual lawn mowers, tracked remote-controlled lawn mowers have higher work efficiency and can complete large-scale mowing tasks in a short period of time. Moreover, operators do not need to push behind the machine, reducing labor intensity.
Adapt to complex terrain: Due to its track like design and good maneuverability, it can work normally in various complex terrain conditions, including uneven ground, slopes, wetlands, etc.
3, Advantages
environment protection
Electric lawn mowers use electricity as power, and compared to traditional fuel powered lawn mowers, they have no exhaust emissions, are more environmentally friendly, and do not produce harmful gases such as carbon monoxide and hydrocarbons, which helps reduce air pollution.
be quiet
The electric lawn mower has relatively low noise during operation. In general, its noise level is around 70-80 decibels, while the noise of a fuel powered lawn mower may reach 90-100 decibels. Lower noise levels will not cause too much disturbance to the lives of surrounding residents, especially suitable for use in residential areas.
Easy to operate
The start of an electric lawn mower usually only requires pressing the power switch, without the complex preheating and rope starting operations like a fuel lawn mower. Moreover, the speed adjustment and mowing height adjustment of electric lawn mowers are relatively simple and easy to operate, even inexperienced users can quickly learn how to use them.
Low maintenance cost
The structure of an electric lawn mower is relatively simple and does not have a complex engine system. The main maintenance work is to regularly clean the blades, check the status of the motor and battery (if it is a DC motor), etc. Compared with fuel powered lawn mowers, there is no need to replace oil, spark plugs, and other components, saving maintenance costs and time.
4, Applicable scenarios
Family Courtyard
For small courtyard lawns in ordinary households, electric lawn mowers are a very suitable choice. It is easy to operate, has low noise, will not cause too much interference to family life, and has good environmental performance, which can keep the courtyard lawn clean and beautiful.
Small parks or green spaces
In some relatively small parks and green spaces, electric lawn mowers can also play a good role. It can efficiently trim lawns and, due to its environmental and quiet characteristics, will not cause excessive noise pollution to tourists.
Hunan Huiguang Xinte Technology Co., Ltd. is like a bright star shining brightly in the industry, full of vitality and innovation.
As an outstanding enterprise integrating industrial production and trade services, we are equipped with advanced production equipment and have a professional production team. From the careful selection of raw materials to the refined production process, every link is strictly controlled to ensure excellent and stable product quality. Our product line is extremely rich and diverse, covering a full set of equipment for transmission, distribution, and transformation, as well as many fields such as power distribution switch control equipment and accessories, high and low voltage switch cabinets, and prepaid switches, which can fully meet the personalized needs of different customers.
We also have an extremely professional team. They are well aware of domestic and foreign markets and have rich trade experience and excellent communication skills. Since the company was established in 2014, it has been a cooperator of the State Grid Corporation of China. The service scope covers the vast 9.6 million square kilometers of land and has received countless praises. At the same time, we cooperate closely with hundreds of power accessory manufacturers and have sufficient supply resources. In 2019, the company successfully passed the ISO9000 quality management system certification. We are always committed to providing customers with one-stop trade services, from product selection and quotation to logistics distribution and after-sales service, and follow up attentively throughout the process. With high-quality products and efficient services, our products are sold well in domestic and foreign markets and have won wide acclaim and high trust from customers.
After-sales guarantee is our solemn promise to customers. We have established a perfect after-sales service system and are equipped with professional after-sales personnel and sufficient maintenance accessories. No matter what problems customers encounter, we can respond quickly and provide practical solutions at the first time. We provide all-round after-sales support, including product installation and debugging, technical training, maintenance and other services to ensure that customers have no worries.
Looking forward to the future, Hunan Huiguang Xinte Technology Co., Ltd. will continue to adhere to the business philosophy of "quality first, customer first, and innovation and development", continuously improve its own strength, and provide customers with more high-quality products and services. We sincerely hope to join hands with friends from all walks of life to create a better future!
Q: Could I use my own LOGO or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q: What is the delivery time?
A: Our lead time for samples is one week; 15-30 days for mass production. It is usually according to the quantity and items.
Q: May I visit your factory?
A: You are welcome to visit us anytime. We can also pick you up from nearest airport and Train station.
Q: Please send your price list for our reference.
A: We do not have standard price list because we produce according to customer design.
We can provide the quotation for your inquiries in a shortest possible time.
Q:Please quote the price for me
A: Our standard response time is 2 working hours, once you confirm the demand and drawing we shall provide the quote within 12 working hours.
Q:Can I get some sample?
A: Sure. We believe sample order is a good way to start our cooperation.
If it is a standard product, it would be for free but freight on your account.
If customized, we shall prepare the sample after receipt of development cost.
Q: Have FASTENERS 100% assembled well in stock?
A: Some of standard size is in stock. Most is OEM item out of stock.
Audited Supplier 
){kind=link}